MENU

Dmesg from Samsung G9500 5.7.0 Kernel

July 14, 2020 •

EAC4089525A5A0A368E3AD24641B74CF.jpg

[    0.000000] kernel: Booting Linux on physical CPU 0x0000000000 [0x51af8014]
[    0.000000] kernel: Linux version 5.7.0-rc7 ([email protected]) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu1), GNU ld (GNU Binutils for Ubuntu) 2.34) #5 SMP PREEMPT Tue Jul 14 01:25:05 CST 2020
[    0.000000] kernel: efi: EFI v2.70 by EDK II
[    0.000000] kernel: efi:  ACPI 2.0=0x15a090000  SMBIOS=0xfff70000  SMBIOS 3.0=0x159f00000  MEMATTR=0x15ea65698  MEMRESERVE=0x15a3e1d18
[    0.000000] kernel: cma: Reserved 32 MiB at 0x00000000fdc00000
[    0.000000] kernel: ACPI: Early table checksum verification disabled
[    0.000000] kernel: ACPI: RSDP 0x000000015A090000 000024 (v02 QCOM  )
[    0.000000] kernel: ACPI: XSDT 0x000000015A080000 00005C (v01 QCOM   QCOMEDK2 00008998      01000013)
[    0.000000] kernel: ACPI: FACP 0x0000000159F50000 000114 (v05 QCOM   QCOMEDK2 00008998 QCOM 00000001)
[    0.000000] kernel: ACPI: DSDT 0x0000000159F60000 0634EF (v02 QCOMM  MSM8998  00000003 MSFT 05000000)
[    0.000000] kernel: ACPI: DBG2 0x0000000159FD0000 000154 (v01 QCOM   QCOMEDK2 00008998 QCOM 00000001)
[    0.000000] kernel: ACPI: GTDT 0x0000000159F40000 00009C (v02 QCOM   QCOMEDK2 00008998 QCOM 00000001)
[    0.000000] kernel: ACPI: APIC 0x0000000159F30000 0002ED (v05 QCOM   QCOMEDK2 00008998 QCOM 00000001)
[    0.000000] kernel: ACPI: MCFG 0x0000000159F20000 00003C (v01 QCOM   QCOMEDK2 00008998 QCOM 00000001)
[    0.000000] kernel: ACPI: CSRT 0x0000000159F10000 007C8B (v00 QCOM   QCOMEDK2 00008998 QCOM 00000001)
[    0.000000] kernel: ACPI: BGRT 0x0000000159E40000 000038 (v01 INTEL  EDK2     00000002      01000013)
[    0.000000] kernel: ACPI: [Firmware Bug]: Unsupported FADT revision 5.0, should be 5.1+
[    0.000000] kernel: ACPI: FADT has ARM boot flags set, assuming 5.1
[    0.000000] kernel: ACPI: NUMA: Failed to initialise from firmware
[    0.000000] kernel: NUMA: Faking a node at [mem 0x0000000080000000-0x000000016fffffff]
[    0.000000] kernel: NUMA: NODE_DATA [mem 0x16f977100-0x16f978fff]
[    0.000000] kernel: Zone ranges:
[    0.000000] kernel:   DMA      [mem 0x0000000080000000-0x00000000bfffffff]
[    0.000000] kernel:   DMA32    [mem 0x00000000c0000000-0x00000000ffffffff]
[    0.000000] kernel:   Normal   [mem 0x0000000100000000-0x000000016fffffff]
[    0.000000] kernel: Movable zone start for each node
[    0.000000] kernel: Early memory node ranges
[    0.000000] kernel:   node   0: [mem 0x0000000080000000-0x0000000085ffffff]
[    0.000000] kernel:   node   0: [mem 0x000000009d400000-0x000000009f7fffff]
[    0.000000] kernel:   node   0: [mem 0x000000009f800000-0x000000009f9fffff]
[    0.000000] kernel:   node   0: [mem 0x000000009fa00000-0x000000009ff8cfff]
[    0.000000] kernel:   node   0: [mem 0x000000009ff8d000-0x000000009fff6fff]
[    0.000000] kernel:   node   0: [mem 0x000000009ffff000-0x00000000fff5ffff]
[    0.000000] kernel:   node   0: [mem 0x00000000fff60000-0x00000000fff8ffff]
[    0.000000] kernel:   node   0: [mem 0x00000000fff90000-0x0000000159d6bfff]
[    0.000000] kernel:   node   0: [mem 0x0000000159d6c000-0x0000000159e3ffff]
[    0.000000] kernel:   node   0: [mem 0x0000000159e40000-0x0000000159eeffff]
[    0.000000] kernel:   node   0: [mem 0x0000000159ef0000-0x0000000159f0ffff]
[    0.000000] kernel:   node   0: [mem 0x0000000159f10000-0x0000000159fdffff]
[    0.000000] kernel:   node   0: [mem 0x0000000159fe0000-0x000000015a07ffff]
[    0.000000] kernel:   node   0: [mem 0x000000015a080000-0x000000015a09ffff]
[    0.000000] kernel:   node   0: [mem 0x000000015a0a0000-0x000000015a3dffff]
[    0.000000] kernel:   node   0: [mem 0x000000015a3e0000-0x000000015f3cffff]
[    0.000000] kernel:   node   0: [mem 0x000000015f3d0000-0x000000015f3fffff]
[    0.000000] kernel:   node   0: [mem 0x000000015f400000-0x000000016fffffff]
[    0.000000] kernel: Zeroed struct page in unavailable ranges: 244 pages
[    0.000000] kernel: Initmem setup node 0 [mem 0x0000000080000000-0x000000016fffffff]
[    0.000000] kernel: On node 0 totalpages: 887800
[    0.000000] kernel:   DMA zone: 2608 pages used for memmap
[    0.000000] kernel:   DMA zone: 0 pages reserved
[    0.000000] kernel:   DMA zone: 166904 pages, LIFO batch:31
[    0.000000] kernel:   DMA32 zone: 4096 pages used for memmap
[    0.000000] kernel:   DMA32 zone: 262144 pages, LIFO batch:63
[    0.000000] kernel:   Normal zone: 7168 pages used for memmap
[    0.000000] kernel:   Normal zone: 458752 pages, LIFO batch:63
[    0.000000] kernel: psci: probing for conduit method from ACPI.
[    0.000000] kernel: psci: PSCIv1.0 detected in firmware.
[    0.000000] kernel: psci: Using standard PSCI v0.2 function IDs
[    0.000000] kernel: psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] kernel: psci: SMC Calling Convention v1.0
[    0.000000] kernel: ACPI: SRAT not present
[    0.000000] kernel: percpu: Embedded 23 pages/cpu s53784 r8192 d32232 u94208
[    0.000000] kernel: pcpu-alloc: s53784 r8192 d32232 u94208 alloc=23*4096
[    0.000000] kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[    0.000000] kernel: Detected VIPT I-cache on CPU0
[    0.000000] kernel: CPU features: detected: GIC system register CPU interface
[    0.000000] kernel: CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] kernel: ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.000000] kernel: Built 1 zonelists, mobility grouping on.  Total pages: 873928
[    0.000000] kernel: Policy zone: Normal
[    0.000000] kernel: Kernel command line: BOOT_IMAGE=/init/zImage root=/dev/sda26
[    0.000000] kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] kernel: software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB)
[    0.000000] kernel: Memory: 3169392K/3551200K available (13884K kernel code, 2152K rwdata, 7572K rodata, 5632K init, 483K bss, 349040K reserved, 32768K cma-reserved)
[    0.000000] kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] kernel: rcu: Preemptible hierarchical RCU implementation.
[    0.000000] kernel: rcu:         RCU event tracing is enabled.
[    0.000000] kernel: rcu:         RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] kernel:         Tasks RCU enabled.
[    0.000000] kernel: rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] kernel: NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] kernel: GICv3: 608 SPIs implemented
[    0.000000] kernel: GICv3: 0 Extended SPIs implemented
[    0.000000] kernel: GICv3: Distributor has no Range Selector support
[    0.000000] kernel: GICv3: 16 PPIs implemented
[    0.000000] kernel: GICv3: CPU0: found redistributor 0 region 0:0x0000000017b00000
[    0.000000] kernel: ACPI: SRAT not present
[    0.000000] kernel: ITS: No ITS available, not enabling LPIs
[    0.000000] kernel: random: get_random_bytes called from start_kernel+0x310/0x4dc with crng_init=0
[    0.000000] kernel: ACPI GTDT: found 1 memory-mapped timer block(s).
[    0.000000] kernel: arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000000] kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000003] kernel: sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000084] kernel: Console: colour dummy device 80x25
[    0.000687] kernel: printk: console [tty0] enabled
[    0.000744] kernel: ACPI: Core revision 20200326
[    0.002833] kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[    0.002850] kernel: pid_max: default: 32768 minimum: 301
[    0.002921] kernel: LSM: Security Framework initializing
[    0.002981] kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.003002] kernel: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.003704] kernel: ACPI PPTT: No PPTT table found, CPU and cache topology may be inaccurate
[    0.004083] kernel: rcu: Hierarchical SRCU implementation.
[    0.004232] kernel: Remapping and enabling EFI services.
[    0.004596] kernel: smp: Bringing up secondary CPUs ...
[    0.006197] kernel: Detected VIPT I-cache on CPU1
[    0.006226] kernel: GICv3: CPU1: found redistributor 1 region 0:0x0000000017b20000
[    0.006272] kernel: CPU1: Booted secondary processor 0x0000000001 [0x51af8014]
[    0.007738] kernel: Detected VIPT I-cache on CPU2
[    0.007759] kernel: GICv3: CPU2: found redistributor 2 region 0:0x0000000017b40000
[    0.007798] kernel: CPU2: Booted secondary processor 0x0000000002 [0x51af8014]
[    0.009261] kernel: Detected VIPT I-cache on CPU3
[    0.009285] kernel: GICv3: CPU3: found redistributor 3 region 0:0x0000000017b60000
[    0.009325] kernel: CPU3: Booted secondary processor 0x0000000003 [0x51af8014]
[    0.010997] kernel: Detected VIPT I-cache on CPU4
[    0.011027] kernel: GICv3: CPU4: found redistributor 100 region 0:0x0000000017b80000
[    0.011072] kernel: CPU4: Booted secondary processor 0x0000000100 [0x51af8001]
[    0.012566] kernel: Detected VIPT I-cache on CPU5
[    0.012593] kernel: GICv3: CPU5: found redistributor 101 region 0:0x0000000017ba0000
[    0.012633] kernel: CPU5: Booted secondary processor 0x0000000101 [0x51af8001]
[    0.014113] kernel: Detected VIPT I-cache on CPU6
[    0.014142] kernel: GICv3: CPU6: found redistributor 102 region 0:0x0000000017bc0000
[    0.014182] kernel: CPU6: Booted secondary processor 0x0000000102 [0x51af8001]
[    0.015648] kernel: Detected VIPT I-cache on CPU7
[    0.015680] kernel: GICv3: CPU7: found redistributor 103 region 0:0x0000000017be0000
[    0.015720] kernel: CPU7: Booted secondary processor 0x0000000103 [0x51af8001]
[    0.015778] kernel: smp: Brought up 1 node, 8 CPUs
[    0.015924] kernel: SMP: Total of 8 processors activated.
[    0.015933] kernel: CPU features: detected: 32-bit EL0 Support
[    0.015943] kernel: CPU features: detected: CRC32 instructions
[    0.477975] kernel: CPU: All CPU(s) started at EL1
[    0.478017] kernel: alternatives: patching kernel code
[    0.479546] kernel: devtmpfs: initialized
[    0.480046] kernel: KASLR disabled due to lack of seed
[    0.480308] kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.480331] kernel: futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.481348] kernel: pinctrl core: initialized pinctrl subsystem
[    0.481919] kernel: thermal_sys: Registered thermal governor 'step_wise'
[    0.481921] kernel: thermal_sys: Registered thermal governor 'power_allocator'
[    0.482029] kernel: SMBIOS 3.2.0 present.
[    0.482051] kernel: DMI: Samsung G9500/G9500, BIOS EDK II Jul 14 2020
[    0.482539] kernel: NET: Registered protocol family 16
[    0.483491] kernel: DMA: preallocated 256 KiB pool for atomic allocations
[    0.483506] kernel: audit: initializing netlink subsys (disabled)
[    0.483637] kernel: audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1
[    0.484162] kernel: cpuidle: using governor menu
[    0.484361] kernel: hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.484493] kernel: ASID allocator initialised with 32768 entries
[    0.484836] kernel: ACPI: bus type PCI registered
[    0.484845] kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.485073] kernel: Serial: AMBA PL011 UART driver
[    0.490932] kernel: HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.490945] kernel: HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.490956] kernel: HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.490966] kernel: HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.492796] kernel: cryptd: max_cpu_qlen set to 1000
[    0.495667] kernel: ACPI: Added _OSI(Module Device)
[    0.495677] kernel: ACPI: Added _OSI(Processor Device)
[    0.495685] kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.495694] kernel: ACPI: Added _OSI(Processor Aggregator Device)
[    0.495704] kernel: ACPI: Added _OSI(Linux-Dell-Video)
[    0.495712] kernel: ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.495722] kernel: ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.520832] kernel: ACPI: Actual Package length (2) is larger than NumElements field (1), truncated
[    0.520971] kernel: ACPI: Actual Package length (2) is larger than NumElements field (1), truncated
[    0.528197] kernel: ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.534123] kernel: ACPI: Interpreter enabled
[    0.534134] kernel: ACPI: Using GIC for interrupt routing
[    0.534184] kernel: ACPI: MCFG table detected, 1 entries
[    0.544139] kernel: ACPI: Power Resource [WRST] (off)
[    0.545763] kernel: ACPI Warning: \_SB.GPU0._CLS: Return Package is too small - found 1 elements, expected 3 (20200326/nsprepkg-362)
[    0.547151] kernel: ACPI: Power Resource [P0ON] (off)
[    0.547234] kernel: ACPI: Power Resource [P0OF] (off)
[    0.565744] kernel: platform QCOM0033:00: failed to claim resource 0: [mem 0xaaaaaaaa-0x166666664]
[    0.565766] kernel: acpi QCOM0033:00: platform device creation failed: -16
[    0.569547] kernel: iommu: Default domain type: Translated
[    0.569696] kernel: vgaarb: loaded
[    0.569926] kernel: SCSI subsystem initialized
[    0.570052] kernel: libata version 3.00 loaded.
[    0.570143] kernel: ACPI: bus type USB registered
[    0.570220] kernel: usbcore: registered new interface driver usbfs
[    0.570252] kernel: usbcore: registered new interface driver hub
[    0.570306] kernel: usbcore: registered new device driver usb
[    0.570616] kernel: pps_core: LinuxPPS API ver. 1 registered
[    0.570625] kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.570645] kernel: PTP clock support registered
[    0.570708] kernel: EDAC MC: Ver: 3.0.0
[    0.571013] kernel: Registered efivars operations
[    0.571689] kernel: FPGA manager framework
[    0.571787] kernel: Advanced Linux Sound Architecture Driver Initialized.
[    0.572325] kernel: clocksource: Switched to clocksource arch_sys_counter
[    0.572497] kernel: VFS: Disk quotas dquot_6.6.0
[    0.572542] kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.572691] kernel: pnp: PnP ACPI init
[    0.573918] kernel: pnp: PnP ACPI: found 0 devices
[    0.578093] kernel: NET: Registered protocol family 2
[    0.578350] kernel: tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.578396] kernel: TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.578566] kernel: TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.578881] kernel: TCP: Hash tables configured (established 32768 bind 32768)
[    0.578962] kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.579027] kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.579176] kernel: NET: Registered protocol family 1
[    0.579527] kernel: RPC: Registered named UNIX socket transport module.
[    0.579537] kernel: RPC: Registered udp transport module.
[    0.579545] kernel: RPC: Registered tcp transport module.
[    0.579553] kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.579567] kernel: PCI: CLS 0 bytes, default 64
[    0.579684] kernel: Unpacking initramfs...
[    0.845250] kernel: Freeing initrd memory: 26988K
[    0.845764] kernel: hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 7 counters available
[    0.845899] kernel: hw perfevents: enabled with armv8_pmuv3_1 PMU driver, 7 counters available
[    0.845914] kernel: kvm [1]: HYP mode not available
[    0.954665] kernel: Initialise system trusted keyrings
[    0.954778] kernel: workingset: timestamp_bits=44 max_order=20 bucket_order=0
[    0.959183] kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.959674] kernel: NFS: Registering the id_resolver key type
[    0.959694] kernel: Key type id_resolver registered
[    0.959702] kernel: Key type id_legacy registered
[    0.959717] kernel: nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.959815] kernel: 9p: Installing v9fs 9p2000 file system support
[    0.973549] kernel: Key type asymmetric registered
[    0.973559] kernel: Asymmetric key parser 'x509' registered
[    0.973586] kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.973600] kernel: io scheduler mq-deadline registered
[    0.973608] kernel: io scheduler kyber registered
[    0.978468] kernel: efifb: probing for efifb
[    0.978504] kernel: efifb: framebuffer at 0x9d400000, using 16652k, total 16650k
[    0.978515] kernel: efifb: mode is 1440x2960x32, linelength=5760, pages=1
[    0.978523] kernel: efifb: scrolling: redraw
[    0.978532] kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.017654] kernel: Console: switching to colour frame buffer device 180x185
[    1.055896] kernel: fb0: EFI VGA frame buffer device
[    1.056718] kernel: ACPI: AC Adapter [ADP1] (off-line)
[    1.056958] kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.057126] kernel: ACPI: Lid Switch [LID0]
[    1.057710] kernel: [Firmware Bug]: No valid trip found
[    1.057862] kernel: ACPI: Invalid passive threshold
[    1.057940] kernel: [Firmware Bug]: No valid trip found
[    1.058051] kernel: [Firmware Bug]: No valid trip found
[    1.058195] kernel: ACPI: Invalid passive threshold
[    1.058273] kernel: [Firmware Bug]: No valid trip found
[    1.058418] kernel: ACPI: Invalid passive threshold
[    1.058495] kernel: [Firmware Bug]: No valid trip found
[    1.058642] kernel: ACPI: Invalid passive threshold
[    1.058723] kernel: [Firmware Bug]: No valid trip found
[    1.058870] kernel: ACPI: Invalid passive threshold
[    1.058959] kernel: [Firmware Bug]: No valid trip found
[    1.059106] kernel: ACPI: Invalid passive threshold
[    1.059184] kernel: [Firmware Bug]: No valid trip found
[    1.059333] kernel: ACPI: Invalid passive threshold
[    1.059423] kernel: [Firmware Bug]: No valid trip found
[    1.059594] kernel: ACPI: Invalid passive threshold
[    1.059754] kernel: ACPI: Invalid passive threshold
[    1.059832] kernel: [Firmware Bug]: No valid trip found
[    1.059930] kernel: [Firmware Bug]: No valid trip found
[    1.060102] kernel: ACPI: Invalid passive threshold
[    1.060282] kernel: EINJ: EINJ table not found.
[    1.066523] kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.067907] kernel: SuperH (H)SCI(F) driver initialized
[    1.068173] kernel: msm_serial: driver initialized
[    1.068915] kernel: cacheinfo: Unable to detect cache hierarchy for CPU 0
[    1.074176] kernel: loop: module loaded
[    1.074792] kernel: megasas: 07.713.01.00-rc1
[    1.075200] kernel: ufshcd-qcom QCOM24A5:00: ufshcd_populate_vreg: non DT initialization
[    1.075314] kernel: ufshcd-qcom QCOM24A5:00: ufshcd_populate_vreg: non DT initialization
[    1.075426] kernel: ufshcd-qcom QCOM24A5:00: ufshcd_populate_vreg: non DT initialization
[    1.075537] kernel: ufshcd-qcom QCOM24A5:00: ufshcd_populate_vreg: non DT initialization
[    1.075656] kernel: ufshcd-qcom QCOM24A5:00: Failed to get reset control -2
[    1.076103] kernel: scsi host0: ufshcd
[    1.076439] kernel: ufshcd-qcom QCOM24A5:00: ufs_qcom_host_reset: reset control not set
[    1.080635] kernel: libphy: Fixed MDIO Bus: probed
[    1.081133] kernel: tun: Universal TUN/TAP device driver, 1.6
[    1.081564] kernel: thunder_xcv, ver 1.0
[    1.081642] kernel: thunder_bgx, ver 1.0
[    1.081718] kernel: nicpf, ver 1.0
[    1.082326] kernel: hclge is initializing
[    1.082413] kernel: hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[    1.082522] kernel: hns3: Copyright (c) 2017 Huawei Corporation.
[    1.082631] kernel: e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    1.082737] kernel: e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.082849] kernel: e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.082937] kernel: e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.083048] kernel: igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[    1.083152] kernel: igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.083257] kernel: igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    1.083373] kernel: igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.083632] kernel: sky2: driver version 1.30
[    1.084133] kernel: VFIO - User Level meta-driver version: 0.3
[    1.085970] kernel: dwc3-qcom QCOM2430:00: IRQ index 4 not found
[    1.086056] kernel: dwc3-qcom QCOM2430:00: IRQ index 3 not found
[    1.087216] kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.087320] kernel: ehci-pci: EHCI PCI platform driver
[    1.087407] kernel: ehci-platform: EHCI generic platform driver
[    1.087560] kernel: ehci-orion: EHCI orion driver
[    1.087669] kernel: ehci-exynos: EHCI Exynos driver
[    1.087780] kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.087883] kernel: ohci-pci: OHCI PCI platform driver
[    1.087975] kernel: ohci-platform: OHCI generic platform driver
[    1.088102] kernel: ohci-exynos: OHCI Exynos driver
[    1.088351] kernel: xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    1.088449] kernel: xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[    1.088720] kernel: xhci-hcd xhci-hcd.1.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000000002010010
[    1.088901] kernel: xhci-hcd xhci-hcd.1.auto: irq 91, io mem 0x0a800000
[    1.089458] kernel: hub 1-0:1.0: USB hub found
[    1.089537] kernel: hub 1-0:1.0: 1 port detected
[    1.089768] kernel: xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    1.089858] kernel: xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[    1.089978] kernel: xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    1.090110] kernel: usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.090502] kernel: hub 2-0:1.0: USB hub found
[    1.090577] kernel: hub 2-0:1.0: 1 port detected
[    1.091962] kernel: usbcore: registered new interface driver usb-storage
[    1.093551] kernel: rtc-efi rtc-efi.0: registered as rtc0
[    1.093687] kernel: rtc-efi rtc-efi.0: setting system clock to 2020-07-13T17:06:37 UTC (1594659997)
[    1.094123] kernel: i2c /dev entries driver
[    1.096678] kernel: sdhci: Secure Digital Host Controller Interface driver
[    1.096773] kernel: sdhci: Copyright(c) Pierre Ossman
[    1.097088] kernel: Synopsys Designware Multimedia Card Interface Driver
[    1.097591] kernel: sdhci-pltfm: SDHCI platform and OF driver helper
[    1.098406] kernel: ledtrig-cpu: registered to indicate activity on CPUs
[    1.099301] kernel: usbcore: registered new interface driver usbhid
[    1.099387] kernel: usbhid: USB HID core driver
[    1.101968] kernel: NET: Registered protocol family 17
[    1.102149] kernel: 9pnet: Installing 9P2000 support
[    1.102248] kernel: Key type dns_resolver registered
[    1.102497] kernel: registered taskstats version 1
[    1.102565] kernel: Loading compiled-in X.509 certificates
[    1.102934] kernel: ALSA device list:
[    1.102985] kernel:   No soundcards found.
[    1.110585] kernel: ufshcd-qcom QCOM24A5:00: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
[    1.147662] kernel: ufshcd-qcom QCOM24A5:00: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 2], pwr[FAST MODE, FAST MODE], rate = 2
[    1.147867] kernel: ufshcd-qcom QCOM24A5:00: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
[    1.148262] kernel: scsi 0:0:0:49488: Well-known LUN    TOSHIBA  THGAF4G9N4LBAIRA 0300 PQ: 0 ANSI: 6
[    1.148934] kernel: scsi 0:0:0:49476: Well-known LUN    TOSHIBA  THGAF4G9N4LBAIRA 0300 PQ: 0 ANSI: 6
[    1.149480] kernel: scsi 0:0:0:49456: Well-known LUN    TOSHIBA  THGAF4G9N4LBAIRA 0300 PQ: 0 ANSI: 6
[    1.150056] kernel: scsi 0:0:0:0: Direct-Access     TOSHIBA  THGAF4G9N4LBAIRA 0300 PQ: 0 ANSI: 6
[    1.150539] kernel: sd 0:0:0:0: Power-on or device reset occurred
[    1.150717] kernel: scsi 0:0:0:1: Direct-Access     TOSHIBA  THGAF4G9N4LBAIRA 0300 PQ: 0 ANSI: 6
[    1.151059] kernel: sd 0:0:0:0: [sda] 15604736 4096-byte logical blocks: (63.9 GB/59.5 GiB)
[    1.151191] kernel: sd 0:0:0:0: [sda] Write Protect is off
[    1.151205] kernel: sd 0:0:0:1: Power-on or device reset occurred
[    1.151251] kernel: sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
[    1.151411] kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    1.151537] kernel: scsi 0:0:0:2: Direct-Access     TOSHIBA  THGAF4G9N4LBAIRA 0300 PQ: 0 ANSI: 6
[    1.151680] kernel: sd 0:0:0:0: [sda] Optimal transfer size 65536 bytes
[    1.151835] kernel: sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[    1.151997] kernel: sd 0:0:0:1: [sdb] Write Protect is off
[    1.152075] kernel: sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
[    1.152105] kernel: sd 0:0:0:2: Power-on or device reset occurred
[    1.152269] kernel: sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    1.152459] kernel: sd 0:0:0:1: [sdb] Optimal transfer size 65536 bytes
[    1.152525] kernel: sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[    1.152551] kernel: scsi 0:0:0:3: Direct-Access     TOSHIBA  THGAF4G9N4LBAIRA 0300 PQ: 0 ANSI: 6
[    1.152811] kernel: sd 0:0:0:2: [sdc] Write Protect is off
[    1.152889] kernel: sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
[    1.152972] kernel: sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    1.153229] kernel: sd 0:0:0:2: [sdc] Optimal transfer size 65536 bytes
[    1.153469] kernel: sd 0:0:0:3: Power-on or device reset occurred
[    1.153825] kernel:  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26
[    1.154061] kernel: sd 0:0:0:3: [sdd] 15360 4096-byte logical blocks: (62.9 MB/60.0 MiB)
[    1.154389] kernel: sd 0:0:0:3: [sdd] Write Protect is off
[    1.154466] kernel: sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
[    1.154622] kernel: sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    1.154808] kernel: sd 0:0:0:3: [sdd] Optimal transfer size 65536 bytes
[    1.154928] kernel:  sdb: sdb1
[    1.155301] kernel:  sdc: sdc1
[    1.156175] kernel: sd 0:0:0:1: [sdb] Attached SCSI disk
[    1.156752] kernel: sd 0:0:0:2: [sdc] Attached SCSI disk
[    1.156756] kernel:  sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13 sdd14 sdd15 sdd16 sdd17 sdd18 sdd19 sdd20 sdd21 sdd22
[    1.157218] kernel: sd 0:0:0:0: [sda] Attached SCSI disk
[    1.159474] kernel: sd 0:0:0:3: [sdd] Attached SCSI disk
[    1.161347] kernel: Freeing unused kernel memory: 5632K
[    1.176404] kernel: Run /init as init process
[    1.176464] kernel:   with arguments:
[    1.176465] kernel:     /init
[    1.176467] kernel:   with environment:
[    1.176468] kernel:     HOME=/
[    1.176470] kernel:     TERM=linux
[    1.176471] kernel:     BOOT_IMAGE=/init/zImage
[    1.625446] kernel: random: fast init done
[    3.157910] kernel: EXT4-fs (sda26): INFO: recovery required on readonly filesystem
[    3.157989] kernel: EXT4-fs (sda26): write access will be enabled during recovery
[    3.177200] kernel: EXT4-fs (sda26): recovery complete
[    3.177833] kernel: EXT4-fs (sda26): mounted filesystem with ordered data mode. Opts: (null)
[    3.428792] systemd[1]: systemd 245.4-4ubuntu3.1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    3.445021] systemd[1]: Detected architecture arm64.
[    3.507505] systemd[1]: Set hostname to <ubuntu>.
[    3.586202] kernel: random: lvmconfig: uninitialized urandom read (4 bytes read)
[    3.981131] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[    4.125120] kernel: random: systemd: uninitialized urandom read (16 bytes read)
[    4.133152] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[    4.141145] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[    4.151198] systemd[1]: Created slice system-modprobe.slice.
[    4.168294] kernel: random: systemd: uninitialized urandom read (16 bytes read)
[    4.177158] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    4.194949] systemd[1]: Created slice User and Session Slice.
[    4.212409] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.230309] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[    4.238680] systemd[1]: Reached target User and Group Name Lookups.
[    4.256204] systemd[1]: Reached target Slices.
[    4.275633] systemd[1]: Reached target Swap.
[    4.293339] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.311262] systemd[1]: Listening on LVM2 poll daemon socket.
[    4.329355] systemd[1]: Listening on multipathd control socket.
[    4.347173] systemd[1]: Listening on Syslog Socket.
[    4.367095] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.385076] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    4.405789] systemd[1]: Listening on Journal Audit Socket.
[    4.424081] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.442573] systemd[1]: Listening on Journal Socket.
[    4.461180] systemd[1]: Listening on Network Service Netlink Socket.
[    4.480022] systemd[1]: Listening on udev Control Socket.
[    4.499557] systemd[1]: Listening on udev Kernel Socket.
[    4.521429] systemd[1]: Mounting Huge Pages File System...
[    4.543787] systemd[1]: Mounting POSIX Message Queue File System...
[    4.565556] systemd[1]: Mounting Kernel Debug File System...
[    4.584727] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[    4.597521] systemd[1]: Starting Journal Service...
[    4.619899] systemd[1]: Starting Set the console keyboard layout...
[    4.639621] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
[    4.651633] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    4.676620] systemd[1]: Starting Load Kernel Module drm...
[    4.697300] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    4.709468] systemd[1]: Starting File System Check on Root Device...
[    4.733357] systemd[1]: Starting Load Kernel Modules...
[    4.757251] systemd[1]: Starting udev Coldplug all Devices...
[    4.780556] systemd[1]: Starting Uncomplicated firewall...
[    4.806076] systemd[1]: Mounted Huge Pages File System.
[    4.825902] systemd[1]: Mounted POSIX Message Queue File System.
[    4.845997] systemd[1]: Mounted Kernel Debug File System.
[    4.868594] systemd[1]: Finished Set the console keyboard layout.
[    4.889153] systemd[1]: [email protected]: Succeeded.
[    4.899921] systemd[1]: Finished Load Kernel Module drm.
[    4.921729] systemd[1]: Finished File System Check on Root Device.
[    4.943770] systemd[1]: Finished Load Kernel Modules.
[    4.966428] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[    4.989787] systemd[1]: Finished Uncomplicated firewall.
[    5.011395] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[    5.024728] systemd[1]: Mounting Kernel Configuration File System...
[    5.048754] systemd[1]: Started File System Check Daemon to report status.
[    5.073382] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.093890] kernel: EXT4-fs (sda26): re-mounted. Opts: (null)
[    5.106963] systemd[1]: Starting Apply Kernel Variables...
[    5.132675] systemd[1]: Mounted Kernel Configuration File System.
[    5.146242] systemd[1]: Finished Remount Root and Kernel File Systems.
[    5.159741] systemd[1]: Finished Apply Kernel Variables.
[    5.171064] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    5.171186] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    5.174394] systemd[1]: Starting Load/Save Random Seed...
[    5.188993] systemd[1]: Starting Create System Users...
[    5.202874] systemd[1]: Started Journal Service.
[    5.701375] kernel: ACPI Error: Field [PIH1] access width (4 bytes) too large for region [CP21] (length 1) (20200326/exfldio-148)
[    5.712903] kernel: ACPI Error: Field [PIH1] Base+Offset+Width 0+0+4 is beyond end of region [CP21] (length 1) (20200326/exfldio-163)
[    5.725198] kernel: ACPI Error: Aborting method \_SB.I2C7.LIDS due to previous error (AE_AML_REGION_LIMIT) (20200326/psparse-529)
[    5.735052] kernel: ACPI Error: Aborting method \_SB.LID0._LID due to previous error (AE_AML_REGION_LIMIT) (20200326/psparse-529)
[    5.745548] kernel: ACPI Error: Field [PIH1] access width (4 bytes) too large for region [CP21] (length 1) (20200326/exfldio-148)
[    5.755617] kernel: ACPI Error: Field [PIH1] Base+Offset+Width 0+0+4 is beyond end of region [CP21] (length 1) (20200326/exfldio-163)
[    5.765668] kernel: ACPI Error: Aborting method \_SB.I2C7.LIDS due to previous error (AE_AML_REGION_LIMIT) (20200326/psparse-529)
[    5.779098] kernel: ACPI Error: Aborting method \_SB.LID0._LID due to previous error (AE_AML_REGION_LIMIT) (20200326/psparse-529)
[    7.224347] kernel: random: crng init done
[    7.224351] kernel: random: 7 urandom warning(s) missed due to ratelimiting
[   14.145257] kernel: Filesystem uses "xz" compression. This is not supported
[   14.339647] kernel: ACPI Error: Field [PIH1] access width (4 bytes) too large for region [CP21] (length 1) (20200326/exfldio-148)
[   14.347876] kernel: ACPI Error: Field [PIH1] Base+Offset+Width 0+0+4 is beyond end of region [CP21] (length 1) (20200326/exfldio-163)
[   14.356303] kernel: ACPI Error: Aborting method \_SB.I2C7.LIDS due to previous error (AE_AML_REGION_LIMIT) (20200326/psparse-529)
[   14.364801] kernel: ACPI Error: Aborting method \_SB.LID0._LID due to previous error (AE_AML_REGION_LIMIT) (20200326/psparse-529)
[   14.373336] kernel: ACPI Error: Field [PIH1] access width (4 bytes) too large for region [CP21] (length 1) (20200326/exfldio-148)
[   14.381587] kernel: ACPI Error: Field [PIH1] Base+Offset+Width 0+0+4 is beyond end of region [CP21] (length 1) (20200326/exfldio-163)
[   14.390770] kernel: ACPI Error: Aborting method \_SB.I2C7.LIDS due to previous error (AE_AML_REGION_LIMIT) (20200326/psparse-529)
[   14.399981] kernel: ACPI Error: Aborting method \_SB.LID0._LID due to previous error (AE_AML_REGION_LIMIT) (20200326/psparse-529)